How Do I Reset My Axis PTZ Camera?

What is the default IP address for AXIS Camera?

The camera’s default IP-address (192.168.

0.90) can be used to configure it.

Follow the instructions below: Reset your Axis camera or video encoder to the factory defaults as described in the Installation Guide..

How do I find my axis camera on my network?

Discovering Your Axis Camera With Your Room Alert Account To navigate to the camera’s Device Details page, select Devices in the navigation bar to the left in your Room Alert Account, and then select your camera from the device list. You may find the unit’s IP address listed under Local IP.

What port do Axis cameras use?

AXIS Camera Station server to devicePortNumberProtocolMain HTTP and HTTPS ports80 & 443TCPDefault bonjour port5353UDPDefault SSDP port1900UDPDefault WS-Discovery port3702UDP

How do I reset my axis camera password?

There is no possibility to find the password. If the password is lost, the Axis product needs to be reset by restoring the factory default settings and re-configured. Instructions on how to perform a factory default can be found in the Installation Guide/User’s Manual for your product.

How do I set up my axis camera?

Configuring an Axis CameraConnect the camera. Connect the Axis camera to the computer using an Ethernet cable. … Configure computer IP address. Set your computer’s IP address to 192.168. … Launch the Setup Axis Camera Tool. … Setup the Camera. … Manual Camera Configuration. … Setup Page. … Configure Users. … Configure Image Settings.More items…•

What is the default username and password for Axis cameras?

The default user of an AXIS product is “root” and previously the default password was “pass”.

How do I reset my IP camera?

If you forget the password, the only way is to reset the IP Camera to factory default setting via hardware reset button. To reset the IP Camera via the hardware reset button, please press and hold the reset button for more than 10 seconds and then all the settings will go to the default settings.

How do I reset my Axis IP camera to default?

To perform a factory reset, do the following:Power down the camera. … Hold down the control button, and with the button held down connect the power. … Keep the CTRL button held down until the LEDs on the front of the camera displays amber (this could take up to 15 seconds).More items…•

How do I reset my axis camera remotely?

Remote reboot Axis IP cameraIn Windows open the Command Prompt.At the command prompt type in (without quotes) “FTP ”You should be now asked to enter a username. … Once you are logged into the camera type in this command press enter and re-type the command again and press enter again.

How do I reset my AXIS p3225?

To reset the product to the factory default settings:Disconnect power from the product.Press and hold the control button and reconnect power. … Keep the control button pressed for about 15–30 seconds until the status LED indicator flashes amber.Release the control button.More items…

How do I reset my AXIS p3364 camera?

To reset the product to the factory default settings:Disconnect power from the product.Press and hold the control button and reconnect power. … Keep the control button pressed for 15–30 seconds until the status LED indicator flashes amber.Release the control button.More items…